Technical Info

  • Suitable for water-works, domestic and agricultural installations
  • Non rising stem suitable to most difficult applications
  • Low pressure drop
  • Finely cast sand blasted heavy brass body
  • Strong cast aluminum hand-wheel
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • High performance PTFE stem seal
  • 200 PSI (for solder joints rating see table 1) non-shock cold working pressure
  • -4°F to +200°F (for solder joints rating see table 1)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • s.114 NPT female by female taper threads
  • Solder end connections
  • GOST-R (Russia)

  NOTE: approvals apply to specific configurations/sizes only.

Part description Quantity Part Material
Body
1
CW617N
Gate
1
CW617N
Stem
1
CW617N
Body cap sealing
1
PTFE
Cap
1
CW617N
Stem ring
1
CW617N
Packing gland seal
1
PTFE
Packing gland
1
CW617N
Packing gland nut
1
CW617N
Red round handle
1
Steel

WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Technical material

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCE115
-
4266

To view all available technical material
Register as a client