s.84 BSPT

INFO REQUEST

full port 1/4” – 4”
hot forged brass ball valve

Technical Data
Quality
  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Handle stops on body to avoid stress at stem
  • Chrome plated brass ball for longer life
Body
  • Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
Stem
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
Sealing
  • Pure PTFE self-lubricating seats with flexible-lip design
Threads
  • ISO 7/1, BS 21 BSPT taper female by female threads
Flow
  • Full port to DIN 3357 for maximum flow

Handle
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Handle removable with valve in service
  • WARNING: do not exceed reasonable temperature and/or electrical load
Working pressure & temperature
  • 40 bar (600 PSI) up to 2″, 30 bar (450 PSI) over 2″ non-shock cold working pressure
  • -40°F to +350°F (-40°C to +170°C)
  • For use with dangerous fluids temperature rating is -4°F /+140°F
    (-20°C /+60°C) and pressure rating is 72psi (5 bar)
  • AS4617 Limitation for GAS: 304psi (2100 Kpa) up to 2″ and 217 psi (1500 Kpa) from 2.1/2″ to 4″ rated working pressure and +32°F/+140°F
    (0°C/ +60°C) temperature
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options up to 2" size
  • Stem extension
  • T-handle
  • Oval lockable handle up to 2″, round over 2″
  • Stainless steel handle (1.4016/AISI 430)
  • Patented locking device for valves up to 4″
  • Male by female threads
  • Stubby handle
  • RuB memory stop designed to be installed with our stubby handle
Upon request
  • Stainless steel ball (1.4401/AISI 316)
  • Glass filled PTFE seals
  • Custom design
PED directive
  • Assessment according to Pressure Equipment Directive
    2014/68/UE module B+D by ICIM (0425)
Approved by or in compliance with
  • The Australian Gas Association (Australia)
  • Factory Mutual (United States)
  • GOST-R (Russia)
  • BSI Group (United Kingdom)
  • RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.

1.1/4” – 2” hollow ball

Part descriptionQ.tyMaterial
1Nickel plated body (external nickel plated, unplated inside up to 2")1CW617N
2Seat2PTFE
3Chrome plated ball1CW617N
4Nickel plated end-cap (external nickel plated, unplated inside up to 2")1CW617N
5Nickel plated stem O-ring design1CW617N
6Geomet® nut1CB4FF (EN10263-2)
7O-Ring2FPM
8Yellow PVC coated Geomet® steel handle1DD11 (EN10111)

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.
Stem configuration of valves over 2” is slightly different. Ball valves are marked CE on handle from 1.1/4” to 2”,
on body over 2” as follow :
CE 0425 cat IIIB+D PS: 5 GAS TS1: -20°C TS2: +60°C

Pressure-temperature chart

AS4617 Limitation for GAS: 304psi (2100 Kpa) up to 2″ and 217 psi (1500 Kpa) from 2.1/2″ to 4″ rated working pressure and +32°F/+140°F (0°C/ +60°C) temperature

Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES84U - 4266