All surfaces of this product in contact with drinking water contain less than 0.25% of lead in compliance with U.S. law.

Technical Info

  • Certified by CSA International to comply with U.S. s3874, California AB1953, and similar laws of other states for the safe handling of drinking water
  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Silicone-free lubricant on all seals
  • Chrome plated lead free brass ball for longer life
  • 100% full port for maximum flow
  • Hot forged sand blasted, unplated lead free brass body and cap sealed with Loctite® or equivalent thread sealant
  • Integrated ISO 5211 and DIN 3337 mounting flange for universal connection to actuator
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Integrated sturdy ISO 5211 flange allows direct mounting of electric and pneumatic actuators, with no bracket or coupling required. See RuB line of electric and pneumatic actuators.
  • Blowout-proof nickel plated lead free brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
  • 600 PSI up to 3/4″ size
  • For 1″ size up to 1.1/2″ size: -Shell rating: 600 PSI -Seat rating: Delta P max permissible 230 PSI
  • non-shock cold working pressure
  • For general use: -4°F/+350°F
  • NSF 61 limits (CSA approval): tested for use in continuous exposure to water of ambient temperature
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Reinforced PTFE self-lubricating seats with flexible-lip and wear compensation design
  • Rack and pinion pneumatic actuator (spring return or double acting)
  • Compact power electric actuator for some sizes
  • Manual lockable handle
  • NPT taper ANSI B.1.20.1 female by female threads
  • Custom design
  • GOST-R (Russia)
  • Certified by CSA International for Drinking Water to NSF/ANSI 61 – NSF/ANSI 372 (United States)
  • RoHS Compliant (EU)

  NOTE: approvals apply to specific configurations/sizes only.

Part description Quantity Part Material
Unplated NPT body
Ball seat
PTFE graphite filled 15% up to 3/4" size, PTFE carbographite filled over 3/4" size
Chrome plated ball
Unplated NPT end-cap
PTFE carbon filled 25%
Nickel plated stem O-ring design
Torque for actuator sizing in-lb
Torque correction factors

Valve torque can vary according to operating frequency, temperature and friction characteristics of the media. If media has more or less friction than water, multiply torque by the following factors. Lubricating oils or liquids                                     0.8 Dry gases, natural gas,                                          1.5 Slurries or liquids bearing abrasive particles   1.5÷2.5

Pressure-temperature chart

for general use

Pressure drop chart

WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to

Technical material

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.


To view all available technical material
Register as a client