• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• Handle clearly shows ball position
• Silicone-free lubricant on all seals
• Handle stops on body to avoid stress at stem
• Chrome plated brass ball for longer life

• Standard port for compact design

• Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications

• Aluminum T-handle enameled red
• WARNING: do not exceed reasonable temperature and/or electrical load

• Blowout-proof nickel plated brass stem
• Pure PTFE adjustable packing gland and reinforced washer for lower torque and easy maintenance

• 600 PSI (for solder joints rating see table 1) non-shock cold working pressure
• -4°F to +350°F  (for solder joints rating see table 1)
• WARNING: freezing of the fluid in the installation may severely damage the valve

• Pure PTFE self-lubricating seats with flexible-lip design

• Stainless steel handle (1.4016 / AISI 430)
• Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
• Stubby handle

• 1/2″ flare 37° by 1/2″ solder end
• 3/4″ flare 37° by 3/4″ solder end

• Memory stop

• Canadian standards Association (United States, Canada)
• GOST-R (Russia)
• RoHS Compliant (EU)

  NOTE: approvals apply to specific configurations/sizes only.