CSA - Canadian Standards Association
Select the certification file for download
Document
Document
Technical Info
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- No maintenance ever required
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Handle stops on body to avoid stress at stem
- Chrome plated brass ball for longer life
- Full port to DIN 3357 for maximum flow
- Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
- Side drain allows easy and safe downstream line venting
- Finest brass according to EN 12165 and EN 12164 specifications
- Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
- WARNING: do not exceed reasonable temperature and/or electrical load
- Handle removable with valve in service
- Blowout-proof nickel plated brass stem
- Maintenance-free, double FPM O-rings at the stem for maximum safety
- 600 PSI (40 bar) non-shock cold working pressure
- 250 PSI (17 bar) non-shock working pressure for LP-Gas
- -40°F to +350°F (-40°C to +170°C)
- WARNING: freezing of the fluid in the installation may severely damage the valve
- Pure PTFE self-lubricating seats with flexible-lip design
- Stem extension
- T-handle
- Oval lockable handle
- Stainless steel handle (1.4016 / AISI 430)
- Patented locking device
- Stubby handle
- RuB memory stop designed to be installed with our stubby handle
- NPT taper ANSI B.1.20.1 female by female threads
- 1/4″ NPT side tap
- Stainless steel ball and/or stem (1.4401 / AISI 316)
- Glass filled PTFE seals
- Custom design
- Dual side drain port
- Canadian standards Association (United States, Canada)
- GOST-R (Russia)
- RoHS Compliant (EU)
- Underwriters Laboratories (United States, Canada): – Guide YSDT: LP-Gas shut-off valve – Guide YRBX: Flammable liquid shut-off valve – Guide YRPV: Gas shut-off valve for use with natural and manufactured gases – Guide MHKZ: No. 6 oil at 250°F
NOTE: approvals apply to specific configurations/sizes only.
1.1/4”- 2” hollow ball
| Part description | Quantity | Part Material |
|---|---|---|
|
Unplated body
|
1
|
CW617N
|
|
Seat
|
2
|
PTFE
|
|
Chrome plated ball
|
1
|
CW617N
|
|
Unplated end-cap
|
1
|
CW617N
|
|
Nickel plated stem O-ring design
|
1
|
CW617N
|
|
Geomet® nut
|
1
|
CB4FF (EN10263-2)
|
|
O-Ring
|
2
|
FPM
|
|
Yellow PVC coated Geomet® steel handle
|
1
|
DD11 (EN10111)
|
|
Unplated plug
|
1
|
CW617N
|
DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.
Pressure-temperature chart
Pressure drop chart
WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Technical material
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES82
-
4314
To view all available technical material
Register as a client