CSA - Canadian Standards Association
Select the certification file for download
Document
Document
Document
Technical Info
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Chrome plated brass ball for longer life
- Handle stops on body to avoid stress at stem
- Full port to DIN 3357 for maximum flow
- Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
- Finest brass according to EN 12165 and EN 12164 specifications
- Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
- WARNING: do not exceed reasonable temperature and/or electrical load
- Blowout-proof nickel plated brass stem
- Pure PTFE adjustable packing gland and reinforced washer for lower torque and easy maintenance
- Triple stem seals in sizes over 2″
- 600 PSI (40 bar) up to 2″, 450 PSI (30 bar) over 2″, (150 WSP / -10 bar all sizes) non-shock cold working pressure
- 250 PSI (17 bar) non-shock working pressure for LP-Gas
- *150 psig (10 bar) non-shock steam working pressure. Not suitable for throttling steam
- -40°F to +366°F (-40°C to +185°C)
- WARNING: freezing of the fluid in the installation may severely damage the valve
- Glass filled pure PTFE self-lubricating seats with flexible-lip design
- Stem extension
- Lead free for safe drinking water (0.25% or less Pb)
- T-handle
- Stainless steel handle (1.4016 / AISI 430)
- Oval lockable handle up to 2″, round over 2″
- Patented locking device for valves up to 4″
- Male by female NPT threads up to 4″
- Stubby handle
- NPT taper ANSI B. 1.20.1 female by female threads
- Stainless steel ball and/or stem (1.4401 / AISI 316)
- Custom design
- Pure PTFE seals
- Canadian standards Association (United States, Canada)
- Factory Mutual (United States)
- GOST-R (Russia)
- RoHS Compliant (EU)
- Underwriters Laboratories (United States, Canada): – Guide YSDT: LP-Gas shut-off valve – Guide YRBX: Flammable liquid shut-off valve – Guide YRPV: Gas shut-off valve for use with natural and manufactured gases – Guide MHKZ: No. 6 oil at 250°F
- Meeting WW-V-35C Federal U.S. Specification (United States)
- CRN-TSSA acc. to MSS SP110 (Canada)
- Kuwait Fire Service Directorate (Kuwait) NOTE: approvals apply to speficic configurations/sizes only.
1.1/4”- 2” hollow ball
| Part description | Quantity | Part Material |
|---|---|---|
|
Unplated NPT body
|
1
|
CW617N
|
|
Seat
|
2
|
PTFE glass filled 5-15%
|
|
Chrome plated ball
|
1
|
CW617N
|
|
Unplated NPT end-cap
|
1
|
CW617N
|
|
Nickel plated stem packing gland design
|
1
|
CW617N
|
|
Nickel plated gland nut
|
1
|
CW617N
|
|
Geomet® nut
|
1
|
CB4FF (EN10263-2)
|
|
Packing gland seal
|
1
|
PTFE
|
|
Washer
|
1
|
PTFE carbon filled 25%
|
|
Yellow PVC coated Geomet® steel handle
|
1
|
DD11 (EN10111)
|
DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4. Stem configuration od valves over 2” is slightly different.
Pressure-temperature chart
Pressure drop chart
WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Technical material
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES92
-
4711
To view all available technical material
Register as a client