Technical Info

  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Handle stops on body to avoid stress at stem
  • Full port to DIN 3357 for maximum flow
  • Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Handle removable with valve in service
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
  • 600 PSI (40 bar) up to 2″, 450 PSI (30 bar) over 2″ non-shock cold working pressure
  • 250 psi (17 bar) non-shock working pressure for LP-Gas
  • -40°F to +350°F (-40°C to +170°C)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Pure PTFE self-lubricating seats with flexible-lip design
  • Stem extension
  • T-handle
  • Stainless steel handle (1.4016 / AISI 430)
  • Oval lockable handle up to 2″, round over 2″
  • Patented locking device for valves up to 4″
  • Stubby handle
  • RuB memory stop designed to be installed with our stubby handle
  • NPT taper ANSI B.1.20.1 female by female threads
  • Stainless steel ball (1.4401 / AISI 316)
  • Glass filled PTFE seals
  • Custom design
  • Special configuration for industrial oxygen application
  • Canadian standards Association (United States, Canada)
  • Factory Mutual (United States)
  • GOST-R (Russia)
  • RoHS Compliant (EU)
  • Underwriters Laboratories (United States, Canada): – Guide YSDT: LP-Gas shut-off valve – Guide YRBX: Flammable liquid shut-off valve – Guide YRPV: Gas shut-off Valve for use with natural and manufactured gases – Guide MHKZ: No. 6 oil at 250°F
  • Meeting WW-V-35C Federal U.S. Specification (United States)
  • CRN-TSSA acc. to MSS SP110 (Canada) NOTE: approvals apply to specific configurations/sizes only.

1.1/4” – 2” hollow ball

Part description Quantity Part Material
Unplated NPT body
1
CW617N
Seat
2
PTFE
Chrome plated ball
1
CW617N
Unplated NPT end-cap
1
CW617N
Nickel plated stem O-ring design
1
CW617N
Geomet® nut
1
CB4FF (EN10263-2)
O-Ring
2
FPM
Yellow PVC coated Geomet® steel handle
1
DD11 (EN10111)

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4. Stem configuration of valves over 2” is slightly different.

Pressure-temperature chart
Pressure drop chart

WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Technical material

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES95
-
4711

To view all available technical material
Register as a client