Technical Info
• Anti-static device • Locking device • Long cycle life • Test standard: API 598 • API 607 4th edition fire safe approval • Vacuum service to 29″ Hg
• ISO 5211 actuator mounting pad • Body: ASTM A351 Gr. CF8M
• Handle in ASTM A536 Gr. 65-45-12 / SS304 • WARNING: do not exceed reasonable temperature and/or electrical load
• Blow-out proof stem design • Adjustable stem packing
• General use: 50 bar / 750 PSI (see chart on reverse) • 19 bar / 275 PSI for ASME 150 CF8M (see chart on reverse) • Steam rating: 10 bar / 150 PSI WSP • -45,5°C to +246°C (-50°F to +475°F) • WARNING: freezing of the fluid in the installation may severely damage the valve
• ME-PTFE seal kits: -replaces PTFE, RPTFE and FPA -low deformation under load -low permeation
• ANSI B16.5, B16.10 and B16.34 full compliance
*ME-PTFE is moleculary enhanced PTFE
| Part description | Quantity | Part Material |
|---|---|---|
|
Body
|
1
|
ASTM A351-CF8M
|
|
Cap
|
1
|
ASTM A351-CF8M
|
|
Ball
|
1
|
ASTM A351-CF8M
|
|
Stem
|
1
|
ASTM A276 Gr. 316
|
|
Seat
|
2
|
ME-PTFE*
|
|
Gasket
|
1
|
GRAFOIL
|
|
Thrust washer
|
1
|
ME-PTFE*
|
|
Packing
|
1
|
GRAFOIL
|
|
Gland
|
1
|
ASTM A351- Gr.CF8
|
|
Stopper
|
1
|
SS304
|
Valve torque can vary according to operating frequency, temperature and friction characteristics of the media. If media has more or less friction than water, multiply torque by the following factors.
| Lubricating oils or liquids | 0.8 |
| Dry gases, natural gas | 1.5 |
| Slurries or liquids bearing abrasive particles | 1.5÷2.5 |
WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Technical material
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
To view all available technical material
Register as a client