• 100% seal test guaranteed
• Arrow on the valve body clearly shows the flow direction
• No metal-to-metal moving parts
• No maintenance ever required
• Stem clearly shows ball position
• Silicone-free lubricant on all seals
• Chrome plated DZR and lead free brass ball for longer life and with  anti-freeze function

• Full port to DIN 3357 for maximum flow

• Hot forged sand blasted DZR and lead free unplated body and cap sealed with Loctite® or equivalent thread sealant
• Dezincification-resistant and lead free brass in compliance with HCACL Hygienic copper alloy composition (UBA list)

• Integrated sturdy ISO 5211 flange allows direct mounting of electric and pneumatic actuators, with no bracket or coupling required. See RuB line of electric and pneumatic actuators.

• Maintenance free, double EPDM O-rings at the stem for maximum safety
• Blowout-proof unplated DZR and lead free brass stem

• Shell rating: 600 PSI non-shock cold working pressure
• Seat rating/compression ends: 230 PSI max non-shock cold working pressure (see chart for pressure/temperature limits)
• -4°F to +250°F
• WARNING: freezing of the fluid in the installation may severely damage the valve

• EPDM seats for lower torque

• S.468 DZR and lead free 22mm compression ends
• Rack and pinion pneumatic actuator (spring return or double acting)
• Compact power electric actuator
• Manual lockable handle

• Compression ends to EN 1254-2

• Custom design

• Water Regulations Advisory Scheme (United Kingdom)
• Certified by CSA International for Drinking Water to NSF/ANSI 372 (United States)

NOTE: approvals apply to specific configurations/sizes only.