Document
Technical Info
- Suitable for domestic, industrial, pneumatic and hydraulic installations
- Robust construction
- Hot forged brass body
- Inspection cap
- 145 psi (10 bar) from 1/2” to 2”, 85 psi (6 bar) over 2” non-shock cold working pressure
- +32°F to +194°F (0°C to +90°C)
- WARNING: freezing of the fluid in the installation may severely damage the valve
- Metal to metal sealing
- ISO 228 female parallel thread
- NPT taper ANSI B.1.20.1 female by female threads
- The product described in this document meets the requirements of PED Directive 2014/68/UE and according to art .4 par.3, it does not require CE marking; it cannot be used with dangerous gases in sizes larger than 25 mm
Section view of lateral exagonal cap.
This draw shows seals gasket configuration.
The configuration of metal seals is slightly different.
| Part description | Quantity | Part Material |
|---|---|---|
|
Unplated body
|
1
|
CW617N
|
|
Unplated bonnet
|
1
|
CW617N
|
|
Unplated sealing disc
|
1
|
CW617N
|
|
Gasket disc (only in 2 1/2”, 3” and 4” sizes)
|
1
|
FIBER
|
WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Technical material
Document
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCE126N
-
0
To view all available technical material
Register as a client