s.114 NPT

Request Info

1/2″ – 4″
heavy pattern brass gate valve

Technical Data
Quality
  • Suitable for water-works, domestic and agricultural installations
  • Non rising stem suitable to most difficult applications
Body
  • Low pressure drop
  • Finely cast sand blasted heavy brass body
Stem
  • High performance PTFE stem seal
Threads
  • NPT female by female taper threads

Handle
  • Strong cast aluminum hand-wheel
  • WARNING: do not exceed reasonable temperature and/or electrical load
Working pressure & temperature
  • 200 PSI non-shock cold working pressure
  • -4°F/ +350°F
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • S.115 solder end connections
Approved by or in compliance with
  • GOST-R (Russia)

 

NOTE: approvals apply to specific configurations/sizes only.

Part descriptionQ.tyMaterial
1Body1CW617N
2Gate1CW617N
3Stem1CW617N
4Body cap sealing1PTFE
5Cap1CW617N
6Stem ring1CW617N
7Packing gland seal1PTFE
8Packing gland1CW617N
9Packing gland nut1CW617N
10Red round handle1Steel
11Disc1Aluminum
12Handle nut1CW617N
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCE114 - 4163