Abrasive media? Life problems with your current valves?

RuB has the solution! Thanks to its long experience in industrial applications, RuB offers a variety of configurations specifically designed to solve critical situations. Brass is notably a “soft” alloy with high copper content having features that make it ideal for plumbing and sanitary installations. When it comes to industrial applications, however, you may need the tough chemistry of stainless steel.

And here we are: RuB combines the properties of a brass body with strength of stainless steel ball and stem. Ideal for abrasive media and other severe applications.

Technical Info

  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Stainless steel ball and stem for abrasive liquids
  • Handle stops on body to avoid stress at stem
  • Full port to DIN 3357 for maximum flow
  • Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Blowout-proof stainless steel stem
  • Pure PTFE adjustable packing gland and reinforced washer for lower torque and easy maintenance
  • 600 PSI (40 bar) up to 2″,  (150 WSP / -10 bar) non-shock cold working pressure
  • *150 psig (10 bar)  non-shock steam working pressure. Not suitable for throttling steam
  • -40°F to +366°F (-40°C to +170°C)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Glass filled pure PTFE self-lubricating seats with flexible-lip design
  • Stem extension
  • T-handle
  • Stainless steel handle (1.4016 / AISI 430)
  • Oval lockable handle
  • Patented locking device
  • Stubby handle
  • NPT taper ANSI B. 1.20.1 female by female threads
  • Custom design
  • Pure PTFE seals
  • Male by female  NPT threads
  • RoHS Compliant (EU) NOTE: approvals apply to speficic configurations/sizes only.
Part description Quantity Part Material
Unplated NPT body
1
CW617N
Seat
2
PTFE glass filled 5-15%
Stainless steel ball
1
1.4401 / AISI 316
Unplated NPT end-cap
1
CW617N
Stainless steel stem packing gland design
1
1.4401 / AISI 316
Nickel plated gland nut
1
CW617N
Geomet® nut
1
CB4FF (EN10263-2)
Packing gland seal
1
PTFE
Washer
1
PTFE carbon filled 25%
Yellow PVC coated Geomet® steel handle
1
DD11 (EN10111)

d shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.

Pressure-temperature chart
Pressure drop chart

WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Technical material

Document

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES9248
-
4314

To view all available technical material
Register as a client